Xconfiguration Networkservices Snmp Communityname; Xconfiguration Networkservices Snmp Systemcontact; Xconfiguration Networkservices Snmp Systemlocation; Xconfiguration Networkservices Ssh Allowpublickey - Cisco TelePresence System Codec C90 Reference Manual

Cisco TelePresence System Codec C90
Contents Introduction

xConfiguration NetworkServices SNMP CommunityName

Enter the name of the Network Services SNMP Community. SNMP Community names are used to
authenticate SNMP requests. SNMP requests must have a password (case sensitive) in order to
receive a response from the SNMP Agent in the codec. The default password is "public". If you have
the Cisco TelePresence Management Suite (TMS) you must make sure the same SNMP Community is
configured there too. NOTE: The SNMP Community password is case sensitive.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration NetworkServices SNMP CommunityName: "public"

xConfiguration NetworkServices SNMP SystemContact

Enter the name of the Network Services SNMP System Contact.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example: xConfiguration NetworkServices SNMP SystemContact: ""

xConfiguration NetworkServices SNMP SystemLocation

Enter the name of the Network Services SNMP System Location.
ADMIN
Requires user role:
<S: 0, 50>
Value space:
Format: String with a maximum of 50 characters.
Example: xConfiguration NetworkServices SNMP SystemLocation: ""

xConfiguration NetworkServices SSH Mode

SSH (or Secure Shell) protocol can provide secure encrypted communication between the codec and
your local computer.
Requires user role: ADMIN
Value space: <On/Off>
On: The SSH protocol is enabled.
Off: The SSH protocol is disabled.
Example: xConfiguration NetworkServices SSH Mode: On
D14641.06 Codec C90 API Reference Guide TC5.0 November 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
About the API xConfiguration xConfiguration

xConfiguration NetworkServices SSH AllowPublicKey

xConfiguration NetworkServices Telnet Mode

48
xCommand
Secure Shell (SSH) public key authentication can be used to access the codec.
Requires user role: ADMIN
Value space: <On/Off>
On: The SSH public key is allowed.
Off: The SSH public key is not allowed.
Example: xConfiguration NetworkServices SSH AllowPublicKey: On
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Value space: <On/Off>
On: The Telnet protocol is enabled.
Off: The Telnet protocol is disabled. This is the factory setting.
Example: xConfiguration NetworkServices Telnet Mode: Off
API Reference Guide
xStatus Appendices
www.cisco.com