Xcommand Camera Preset Activate; Xcommand Camera Preset Activatedefaultposition; Xcommand Camera Preset Edit - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Camera Preset Activate

Activate one of the stored camera presets.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras plus the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Activate PresetId:
where
: Integer (1..35)
PresetId
The ID of the camera preset you want to activate.

xCommand Camera Preset ActivateDefaultPosition

Sets the cameras to their default position, if one is defined. The default position is defined
by xCommand Camera Preset Store or by xCommand Camera Preset Edit. Only one default
position can be defined per camera.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset ActivateDefaultPosition [CameraId: CameraId]
where
: Integer (1..7)
CameraId
The ID of the camera preset you want to activate. If CameraId is not specified, all
cameras will be set in their respective default position, if one is defined.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
PresetId
xCommand xCommand

xCommand Camera Preset Edit

Edit a stored camera preset. You can change the name of the camera preset and its position in
the list that is returned by the xCommand Camera Preset List command. You can also change
whether or not this preset is the default position for the associated camera.
Note that the xCommand Camera Preset commands applies to an individual camera. This is
in contrast to the xCommand Preset commands where a single preset covers ALL connected
cameras and the Video Input switcher settings.
Requires user role: ADMIN, USER
USAGE:
xCommand Camera Preset Edit PresetId:
[Name: "Name"] [DefaultProsition: DefaultProsition]
where
: Integer (1..35)
PresetId
The ID of the camera preset you want to edit.
: Integer (1..35)
ListPosition
The position in the list returned by the xCommand Camera Preset List command.
: String (0, 255)
Name
The name of the camera preset. It will be used in the list returned by the xCommand
Camera Preset List command.
: False/True
DefaultProsition
Defines whether or not this preset is the default position for the associated camera.
Note that each camera can only have one default position, so if set, the old default
preset will automatically be marked as not default.
120
API Reference Guide
xStatus Appendices
PresetId [ListPosition: ListPosition]
Copyright © 2017 Cisco Systems, Inc. All rights reserved.