Cisco TelePresence SX80 Reference Manual page 201

Cisco TelePresence SX80

Introduction
xStatus SIP Registration [n] URI
Shows the URI used for registration to the SIP Proxy server.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus SIP Registration 1 URI
*s SIP Registration 1 URI: "firstname.lastname@company.com"
** end
xStatus SIP Secure
Shows the encryption status of the signaling with the SIP Proxy server.
Requires user role: ADMIN, USER
Value space of the result returned:
True/False
Example:
xStatus SIP Secure
*s SIP Secure: True
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus SIP Verified
Shows whether or not the SSL certificate of the server that the video system / codec tries to
register to is included in the codec's trusted CA-list. The server is typically a Cisco VCS or
CUCM.
True: The server's SIP certificate is checked against the trusted CA-list on the codec and found
valid. Additionally, the fully qualified domain name of the server matches the valid certificate.
False: A TLS connection is not set up because the SIP certificate verification failed or the domain
name did not match. Note that the status also returns False when TLS is not used (xConfiguration
SIP DefaultTransport not set to TLS) or certificate verification is switched off (SIP TlsVerify: Off.
This setting is accessible through your products web interface).
Requires user role: ADMIN, USER
Value space of the result returned:
True/False
Example:
xStatus SIP Verified
*s SIP Verified: False
** end
201
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.