Xcommand Audio Volume Unmute; Xcommand Audio Vumeter Start; Xcommand Audio Vumeter Stop; Xcommand Audio Vumeter Stopall - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Audio Volume Unmute

Set the volume on the endpoint back on after muting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Unmute

xCommand Audio VuMeter Start

Start a VU meter to show the audio signal level on the specified connector. You have to specify
both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the
connector. The VU meter measures the input level for frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Start ConnectorID:
ConnectorType
where
: Integer (1..8) for Microphone; Integer (1..4) for Line; Integer (1..3) for HDMI
ConnectorID
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector.
: HDMI/Line/Microphone
ConnectorType
Select the connector type.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
ConnectorID ConnectorType:
xCommand xCommand

xCommand Audio VuMeter Stop

Stop the VU meter on the specified connector. You have to specify both the connector's type
and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Stop ConnectorID:
ConnectorType
where
: Integer (1..8) for Microphone; Integer (1..4) for Line; Integer (1..3) for HDMI
ConnectorID
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector.
: HDMI/Line/Microphone
ConnectorType
Select the connector type.

xCommand Audio VuMeter StopAll

Stop all VU meters.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter StopAll
112
API Reference Guide
xStatus Appendices
ConnectorID ConnectorType:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.