Add Camera Position Preset; About Camera Presets - Cisco TelePresence Touch 10 User Manual

Camera

Add Camera Position Preset

1
Tap Camera to invoke the camera
adjustment menu.
4
Key in a descriptive name and tap Save
to put changes into effect.
D1534509 Cisco TelePresence User Guide
Systems using Touch10
Produced: March 2018 for CE9.3
All contents © 2010–2018
Cisco Systems, Inc. All rights reserved
2
Selfview will be activated automatically.
Adjust Tilt, Pan and Zoom, as required.
+
Then tap Add new.
5
Tap anywhere outside the
menu when you're done.
3
Tap in the text field.

About Camera Presets

Your video system lets you create
predefined zoom and camera
pointing directions (also known as
pan and tilt). Use these to zoom into
the person speaking, if appropriate.
Do not forget to zoom out again
afterwards.
This means that if you want to create
one or more zoom-in presets you
should also create a zoom-out
(overview) preset to conveniently
switch back to overview mode.
Although you may control the far
end camera, i.e. the camera of
any of the other participants (given
that those cameras are remotely
controllable), you cannot define nor
make use of their presets.
34