Xconfiguration Sip Defaulttransport; Xconfiguration Sip Displayname; Xconfiguration Sip Ice Mode; Xconfiguration Sip Ice Defaultcandidate - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xConfiguration SIP DefaultTransport

Select the transport protocol to be used over the LAN.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration SIP DefaultTransport:
where
: TCP/UDP/Tls/Auto
DefaultTransport
TCP: The system will always use TCP as the default transport method.
UDP: The system will always use UDP as the default transport method.
Tls: The system will always use TLS as the default transport method. For TLS connec-
tions a SIP CA-list can be uploaded to the video system. If no such CA-list is available
on the system then anonymous Diffie Hellman will be used.
Auto: The system will try to connect using transport protocols in the following order:
TLS, TCP, UDP.

xConfiguration SIP DisplayName

When configured the incoming call will report the display name instead of the SIP URI.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration SIP DisplayName: "DisplayName"
where
: String (0, 550)
DisplayName
The name to be displayed instead of the SIP URI.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration
DefaultTransport
xCommand

xConfiguration SIP Ice Mode

ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the video
systems can use to discover the optimized media path. Thus the shortest route for audio and
video is always secured between the video systems.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration SIP Ice Mode: Mode
where
: Auto/Off/On
Mode
Auto: ICE is enabled if a TURN server is provided, otherwise ICE is disabled.
Off: ICE is disabled.
On: ICE is enabled.

xConfiguration SIP Ice DefaultCandidate

The ICE protocol needs some time to reach a conclusion about which media route to use (up to
the first 5 seconds of a call). During this period media for the video system will be sent to the
Default Candidate as defined in this setting.
Requires user role: ADMIN
Default value: Host
USAGE:
xConfiguration SIP Ice DefaultCandidate:
where
: Host/Rflx/Relay
DefaultCandidate
Host: Send media to the video system's private IP address.
Rflx: Send media to the video system's public IP address, as seen by the TURN server.
Relay: Send media to the IP address and port allocated on the TURN server.
78
API Reference Guide
xStatus Appendices
DefaultCandidate
Copyright © 2017 Cisco Systems, Inc. All rights reserved.