Xcommand Audio Remoteoutput Connectinput; Xcommand Audio Remoteoutput Disconnectinput - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Audio RemoteOutput ConnectInput

Connect an input to a remote output by giving their IDs as parameters. An input can be
connected to any number of remote output gates, and any number of inputs can be connected
to one remote output gate. Note that all local inputs are automatically added to all remote output
gates when a call is made, and automatically disconnected when the call is ended.
Run xStatus Audio Input LocalInput to get an overview of all local inputs.
This command is mainly intended for internal use by the CE Console. It is only applicable during
a call.
Requires user role: ADMIN
USAGE:
xCommand Audio RemoteOutput ConnectInput OutputId:
[InputGain: InputGain]
where
: Integer (0..65534)
OutputId
The unique identifier of the remote output. It was automatically generated when the call
was made.
: Integer (0..65534)
InputId
The unique identifier of the input. It was either generated when the input was created
with the xCommand Audio Local Input Add command, or when the call was set up
(remote input).
: Integer (-54..15)
InputGain
Set the gain on the input signal. The gain can also be negative (attenuation). The value
-54 dB equals Off.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
OutputId InputId:
xCommand xCommand

xCommand Audio RemoteOutput DisconnectInput

Disconnect an input from a remote output by giving their IDs as parameters. Note that the
remote output is automatically removed when the call has ended.
Run xStatus Audio Output RemoteOutput to get an overview of the remote outputs, and xStatus
Audio Input LocalInput to get an overview of all local inputs.
This command is mainly intended for internal use by the CE Console. It is only applicable during
a call.
Requires user role: ADMIN
USAGE:
xCommand Audio RemoteOutput DisconnectInput OutputId:
InputId
where
: Integer (0..65534)
OutputId
The unique identifier of the remote output. It was automatically generated when the call
was made.
: Integer (0..65534)
InputId
The unique identifier of the input. It was either generated when the input was created
with the xCommand Audio Local Input Add command, or when the call was set up
(remote input).
109
API Reference Guide
xStatus Appendices
OutputId InputId:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.
InputId