Download  Print this page

Advertisement

1
Cisco TelePresence
MX200 G2
MX300 G2
SX80
TC 7.1
User
Guide
D1507602 User Guide
Cisco TelePresence MX200 G2, MX300 G2
SX80
Produced: April 2014 for TC 7.1
All contents © 2010–2014
Cisco Systems, Inc. All rights reserved.

Advertisement

Table of Contents

   Summary of Contents for Cisco MX200 G2

  • Page 1: User Guide

    Cisco TelePresence MX200 G2 MX300 G2 SX80 TC 7.1 User Guide D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 2: Table Of Contents

    Join Scheduled Meeting ............. 35 Administrator Settings—H323 ..........70 Parallel Meetings ..............36 D1507602 User Guide Administrator Settings—EMC Resilience Mode ....71 Cisco TelePresence MX200 G2, MX300 G2 Administrator Settings—Web Snapshots ......72 SX80 Administrator Settings—Factory Reset ........ 73 Produced: April 2014 for TC 7.1 All contents ©...
  • Page 3: Introduction To Video Conferencing

    Introduction to Video Conferencing D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 4: Best Practice

    The noise from such sources is often D1507602 User Guide normally make use of duo video. That perceived as surprisingly loud by the Cisco TelePresence MX200 G2, MX300 G2 implies the use of two video streams, remote participants. SX80 Produced: April 2014 for TC 7.1 All contents ©...
  • Page 5: Tour The Touch Screen

    Recents. meetings. applicable. and the right side to increase the volume. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tap the touch screen Tap a button Scroll in lists Produced: April 2014 for TC 7.1 to wake up the system,...
  • Page 6: Log Onto A System With Your Own Credentials

    To sign out tap You will be prompted Sign-out, as to confirm your outlined. intentions. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 7: Video Calls

    Video Calls D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 8: Place Call From Contact List

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 9: Edit A Contact List Entry, Then Place The Call

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 10: Place Call Using Name

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 11: Place Call Using An Ip Address

    Tap Keypad (this button appears as soon as the call is placed) to invoke the keypad needed for this. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 12: Place Call Using Number

    Tap Keypad (this button appears as soon as the call is placed) to invoke the keypad needed for this. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 13: Receive Call

    Microphone(s) are muted if this symbol is illuminated. To time. mute / unmute the microphone(s), tap the symbol. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 14: Receive Call While In Another Call

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 15: Transfer

    Tap Complete The call will be transferred. transfer—see also text in side bar. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 16: Consult And Transfer

    Transfer to connect the two together, while you leave the call. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 17: Disconnect Yourself From Call

    To disconnect yourself from a call, tap End, as outlined. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 18: A Few Words On Microphone Behavior And Privacy

    The microphone will transmit only when the green LED is illuminated! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 19: Put Call On Hold And Resume A Call On Hold

    Tap Hold, one you were in as outlined. call with (to undo your action). D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 20: Change Call Rate

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 21: Enable Do Not Disturb

    Disturb, outlined. as outlined. changes into effect. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 22: Enable Standby

    Tap the as outlined. outlined. screen to wake it up. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 23: View Keypad While In A Call

    In a call, tap Keypad, as outlined. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 24: Add Additional Participants To Existing Call

    See were in. “Change Call Rate” on page D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 This is an optional feature that may, or may not, be installed on your system.
  • Page 25: Add Incoming Call To Existing Call

    (ACCEPT & MERGE). This applies to MultiSite equipped systems only. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 26: View Meeting Participant List

    (if applicable), as well as who has been put on hold (if applicable). D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 27: Manage Conference Call Layout

    If needed, you may also move the selfview to a different location. “Move the Selfview PiP” on page D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 28: Lock Speaker

    Unlock as speaker. To unlock, repeat the process tapping Unlock as Speaker instead. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 29: Disconnect Participant From Call

    You must be entitled to do so. Tap Drop to disconnect the selected participant, as outlined. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 30: Share Content

    Share Content D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 31: Start And Stop Presentation

    For more on the contact card feature, see “View Meeting Participant List” on page D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 32: Change Presentation Layout

    Tap Layout, as outlined, to invoke the layout options. Select your preferred layout by tapping it. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 33: Scheduled Meetings

    List of Meetings on your Touch device. Scheduled Meetings D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 34: View Meeting List

    Tap again to collapse the information box. information. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 35: Join Scheduled Meeting

    Cisco TelePresence MX200 G2, MX300 G2 time put the current call on hold, just like any If an extension is sustainable, the Meeting will end notification will include an...
  • Page 36: Parallel Meetings

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 37: Contacts

    Contacts D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 38: Directory

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 39: Call Recents

    Clearing the entire Recents list: D1507602 User Guide Scroll, as Tap Clear Recents, as Cisco TelePresence MX200 G2, MX300 G2 Contacts, if outlined, outlined. SX80 needed. to get to Produced: April 2014 for TC 7.1 the top of All contents ©...
  • Page 40: Favorites

    URI, you may edit the entry. Manually adding someone to the list of Favorites: D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 Tap Search or Dial, as Key in a name, Tap the match, if...
  • Page 41: Add Someone To Favorites, While In A Call

    Tap Close, to hide the Tap Save to add keyboard, as outlined. new Favorite, as outlined D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 42: Camera

    The system allows you to predefine camera presets to easily switch between camera views. Camera D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 43: View Camera Settings

    Zoom in and out. Select which camera to control (for configurations with more than one camera). D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tilt Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 44: Add Camera Position Preset

    Cancel to leave menu undoing any changes. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tilt Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 45: Edit Existing Camera Position Preset

    To delete an existing preset tap Remove. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tilt Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 46: Control Own Camera In A Call

    Zoom (b), as outlined. Camera, as outlined. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tilt Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 47: Manage Selfview

    Camera to gain access to the camera control (see the previous page for more on camera control). D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tilt Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 48: Resize The Selfview Pip

    To exit this menu, putting changes into effect, tap anywhere outside the active menu. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 49: Move The Selfview Pip

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 50: Control The Camera Of The Other Participant

    Tap anywhere outside the menu to exit, as outlined. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Tilt Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 51: Settings

    Touch pad provides access to a limited set of parameters only. Settings D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 52: Gain Access To The Settings

    Settings icon in the upper left outlined. corner of the touchpad, as outlined. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 53: Ringtone & Sound

    Cancel function letting you exit the menu undoing any changes you have made. Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 54: Camera Control

    Note how the settings chosen are indicated. In the example shown, Backlight compensation is set to Off. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 55: Main Source Selection

    The options available are system dependent, your system may show more options or less options. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 56: Display

    This menu allows you to set the DVI mode to Analog, Digital or Automatic detection. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 57: Select Language

    About Language Setting The Language page lets you specify the Touch interface menu language. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 58: System Information

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 59: Call Status

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 60: Diagnostic Mode

    D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 61: Restart System

    Use this to restart your system in an orderly and controlled manner. No settings are lost. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 62: Administrator

    Enter Username and Password followed by tapping Log in. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 63: Administrator Settings-set Date And Time

    Manual (as has been done in this example), you must specify the NTP server address to make things work. D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 64: Administrator Settings-call Details

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 65: Administrator Settings-provisioning Wizard

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 66: Administrator Settings-multipoint Mode

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 67: Administrator Settings-ip & Vlan

    Take care! have made. Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 68: Administrator Settings-network Status Touch

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 69: Administrator Settings-sip

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 70: Administrator Settings-h323

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 71: Administrator Settings-emc Resilience Mode

    Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 72: Administrator Settings-web Snapshots

    Caution! There is no Cancel function letting you exit the menu undoing any changes you have made. Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 73: Administrator Settings-factory Reset

    Take care! have made. Take care! D1507602 User Guide Cisco TelePresence MX200 G2, MX300 G2 SX80 Produced: April 2014 for TC 7.1 All contents © 2010–2014 Cisco Systems, Inc. All rights reserved.
  • Page 74 Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at www.cisco.com/go/offices. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the...

This manual is also suitable for:

Mx300 g2Sx80

Comments to this Manuals

Symbols: 0
Latest comments: