Cisco TelePresence SX80 Reference Manual page 189

Cisco TelePresence SX80

Introduction
xStatus Network 1 Ethernet Speed
Shows the Ethernet speed in Mbps. The speed can be in full-duplex or half-duplex.
Requires user role: ADMIN, USER
Value space of the result returned:
10half/10full/100half/100full/1000full
Example:
xStatus Network 1 Ethernet Speed
*s Network 1 Ethernet Speed: "100full"
** end
xStatus Network 1 IPv4 Address
Shows the IPv4 address that uniquely identifies this system.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 IPv4 Address
*s Network 1 IPv4 Address: "192.0.2.149"
** end
xStatus Network 1 IPv4 Gateway
Shows the address of the IPv4 gateway.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 IPv4 Gateway
*s Network 1 IPv4 Gateway: "192.0.2.10"
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
xStatus Network 1 IPv4 SubnetMask
Shows the subnet mask which determines which subnet an IPv4 address belongs to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 IPv4 SubnetMask
*s Network 1 IPv4 SubnetMask: "255.255.255.0"
** end
xStatus Network 1 IPv6 Address
Shows the IPv6 address that uniquely identifies this system.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 IPv6 Address
*s Network 1 IPv6 Address: ""
** end
xStatus Network 1 IPv6 Gateway
Shows the address of the IPv6 gateway.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 IPv6 Gateway
*s Network 1 IPv6 Gateway: ""
** end
189
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.