Xconfiguration Audio Output Line [1 - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction
xConfiguration Audio Output Line [1..6] Equalizer ID
Select the equalizer ID for the audio source that is connected to the output line.
Requires user role: ADMIN, INTEGRATOR
Default value: 1
USAGE:
xConfiguration Audio Output Line
where
: Unique ID that identifies the audio line output. Range: 1..6
n
: Integer (1..8)
ID
Set the equalizer ID.
xConfiguration Audio Output Line [1..6] Equalizer Mode
Define the equalizer mode for the audio source that is connected to the output line.
Requires user role: ADMIN, INTEGRATOR
Default value: Off
USAGE:
xConfiguration Audio Output Line
where
: Unique ID that identifies the audio line output. Range: 1..6
n
: Off/On
Mode
Off: No equalizer.
On: Enable the equalizer for the audio output line.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration
n Equalizer ID: ID
n Equalizer Mode: Mode
xCommand
xConfiguration Audio Output Line [1..6] Level
Define the audio level on the line output connector.
See the Audio Level table in the Physical Interface Guide for the codec for a complete overview
of the menu values represented in dB.
Requires user role: ADMIN, INTEGRATOR
Default value: -10
USAGE:
xConfiguration Audio Output Line
where
: Unique ID that identifies the audio line output. Range: 1..6
n
: Integer (-24..0)
Level
Select a value between -24 and 0, in steps of 1 dB.
xConfiguration Audio Output Line [1..6] Mode
Define the mode for the audio line output.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Audio Output Line
where
: Unique ID that identifies the audio line output. Range: 1..6
n
: Off/On
Mode
Off: Disable the audio line output.
On: Enable the audio line output.
42
API Reference Guide
xStatus Appendices
n Level: Level
n Mode: Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.