Xcommand Cameras Presentertrack Storeposition; Xcommand Cameras Presentertrack Set - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Cameras PresenterTrack StorePosition

This setting applies only when using a Cisco TelePresence SX80 with a Precision 60 camera or
SpeakerTrack 60 camera.
Store the current position of the presenter tracking camera for the overview image of the stage.
The presenter tracking camera will move to this position when activating the feature.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand Cameras PresenterTrack StorePosition
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand xCommand

xCommand Cameras PresenterTrack Set

This setting applies only when using a Cisco TelePresence SX80 with a Precision 60 camera or
SpeakerTrack 60 camera.
Set the presenter tracking mode.
This command takes effect only if the PresenterTrack feature is enabled. Sign in to the video
system's web interface and use the Cameras PresenterTrack Enabled setting to enable or
disable the feature.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand Cameras PresenterTrack Set Mode:
where
: Off/Follow/Diagnostic/Background/Setup/Persistent
Mode
Off: Turn off presenter tracking.
Follow: Turn on presenter tracking. This is the default mode when the feature is
activated from the Touch user interface. Presenter tracking is automatically turned off
when camera moves to a different preset, when another camera is selected, or when
standby is activated.
Diagnostic: Turn on diagnostic mode in order to troubleshoot presenter tracking, or
to see exactly what happens on the video system screen. In diagnostics mode there
are several activities on the screen. The screen will show the overview image, and the
rectangles/squares listed below will be visible:
* RED: The trigger zone.
* YELLOW: The cropped image of the presenter. Visible only when a face is being
tracked.
* GREEN: Indicates that a face is detected and that it is tracked.
* GREEN BLINKING FILLED: Indicates a positive face detection. If the tracked individual
does not get a valid face-read the square becomes red.
* RED BLINKING FILLED: Indicates a false face detection. After some seconds the
tracking stops.
* BLUE: A face is detected but the face is not tracked.
Background: This setting is used by the codec's internal scripts. Turns on presenter
tracking with no cropping of the image.
Setup: This setting is used by the codec's web interface to show the trigger zone on the
video system screen when setting up the PresenterTrack feature.
124
API Reference Guide
xStatus Appendices
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.