Xconfiguration Usermanagement Ldap Attribute; Video Configuration; Xconfiguration Video Defaultmainsource; Xconfiguration Video Input Connector [1..5] Cameracontrol Mode - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xConfiguration UserManagement LDAP Attribute

The attribute used to map to the provided username. If not set, sAMAccountName is used.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Attribute: "Attribute"
where
: String (0, 255)
Attribute
The attribute name.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration xCommand

Video configuration

xConfiguration Video DefaultMainSource

Define which video input source shall be used as the main video source.
Requires user role: ADMIN, USER
Default value: 1
USAGE:
xConfiguration Video DefaultMainSource:
where
: 1/2/3/4
DefaultMainSource
Set the source to be used as the main video source.

xConfiguration Video Input Connector [1..5] CameraControl Mode

Define whether the camera that is connected to this video input connector can be controlled or
not.
Note that camera control is not available for Connector 5 (S-video/Composite).
Requires user role: ADMIN, INTEGRATOR
Default value: Connector 1, 2, 3: On Connector 4, 5: Off
USAGE:
xConfiguration Video Input Connector
where
: Unique ID that identifies the video input connector. Range: 1..5
n
: Connector 1, 2, 3, 4: Off/On Connector 5: Off
Mode
Off: Disable camera control.
On: Enable camera control.
88
API Reference Guide
xStatus Appendices
DefaultMainSource
n CameraControl Mode: Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.