Download Print this page
   

Advertisement

Installation guide for Cisco TelePresence SX80
Cisco offers the SX80 codec as a single unit or in integrator packages.
A single unit is delivered with power cable and basic mounting parts.
An integrator package contains:
Cisco TelePresence SX80 codec
Cisco TelePresence Touch 10 control panel
Cisco cameras and microphones at your choice
Power adapters and power cables
PoE rated Ethernet cable for Touch 10
Custom cables
Basic mounting parts
Display, loudspeakers, and standard cables (Ethernet and HDMI) are
not included.
SX80 supports up to four simultaneous video inputs (cameras or PCs),
three displays, eight microphones and three sets of stereo
loudspeakers.
78-100153-01A0 | FEBRUARY 2014 | © 2014 Cisco Systems, Inc. All rights reserved.
The SX80 codec offers the flexibility
to video enable any meeting space.
Room setup
Explore the Cisco Project Workplace website to find inspiration
and guidelines when preparing your office or meeting room for
video conferencing,
http://www.cisco.com/go/projectworkplace
User guides
User guides and compliance and safety information for this
product, is available at
http://www.cisco.com/go/sx-docs
A 级声明 (A Class product declaration)
EMC class A declaration
本产品为 A 级 ITE,在其使用说明,铭牌等显著位置中已包含如下内容的声明
(We declare here that the subject product is A class ITE product, and the
WARNING: This is a class A product. In a domestic environment this
following statement is clearly marked in the user manual or nameplate):
product may cause radio interference in which case the user may be
required to take adequate measures.
此为 A 级产品。在生活环境中,该产品可能会造成无线电干扰。在这种
情况下,可能需要用户对干扰采取切实可行的措施。
WARNING:
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
警告

Advertisement

   Summary of Contents for Cisco TelePresence SX80

  • Page 1

    Cisco offers the SX80 codec as a single unit or in integrator packages. A single unit is delivered with power cable and basic mounting parts. An integrator package contains: •...

  • Page 2: Front Panel

    Fasten the codec with rack ears to the rack with screws Not in use. matching your rack (not provided). Alarm Lights steady when a serious error occurs. 78-100153-01A0 | FEBRUARY 2014 | © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 3

    Ethernet ports should be used for the Touch 10 control panel, as well as for injector and the codec is not required to be PoE rated (not provided). Cisco’s SpeakerTrack 60 and Precision 60 cameras (see details for the cameras overleaf). Connect a network switch to the codec’s 2...

  • Page 4

    (not provided). first call. This is described in the Getting Started Guide, which is available at http://www.cisco.com/go/sx-docs 78-100153-01A0 | FEBRUARY 2014 | © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 5

    See how to connect the cameras on the following pages. Power adapter Connect the two cameras in the For more details about the Cisco cameras, refer to camera guides that are available at SpeakerTrack 60 assembly to the codec’s http://www.cisco.com/go/camera-docs Power and 2 camera inputs (HDMI).

  • Page 6

    Also connect the camera to the Also connect the camera to the codec’s codec’s dedicated camera control port or 3 Ethernet port, and to power. (D-SUB 9), and to power. 78-100153-01A0 | FEBRUARY 2014 | © 2014 Cisco Systems, Inc. All rights reserved.

  • Page 7

    Find an overview of the offices on the Cisco web site at http://www.cisco.com/go/offices Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners.

Comments to this Manuals

Symbols: 0
Latest comments: