Xconfiguration Userinterface Keytones Mode; Xconfiguration Userinterface Language; Xconfiguration Userinterface Osd Output - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xConfiguration UserInterface KeyTones Mode

You can configure the system to make a keyboard click sound effect (key tone) when typing text
or numbers.
Requires user role: ADMIN, USER
Default value: On
USAGE:
xConfiguration UserInterface KeyTones Mode:
where
: Off/On
Mode
Off: There is no key tone sound effect.
On: The key tone sound effect is turned on.

xConfiguration UserInterface Language

Select the language to be used in menus and messages on the screen and Touch controller.
Requires user role: ADMIN, USER
Default value: English
USAGE:
xConfiguration UserInterface Language:
where
: Arabic/Catalan/ChineseSimplified/ChineseTraditional/Czech/Danish/Dutch/English/
Language
EnglishUK/Finnish/French/FrenchCanadian/German/Hebrew/Hungarian/Italian/Japanese/
Korean/Norwegian/Polish/Portuguese/PortugueseBrazilian/Russian/Spanish/SpanishLatin/
Swedish/Turkish
Select a language from the list. Arabic and Hebrew are not supported in this software
version.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xConfiguration
Mode
Language
xCommand

xConfiguration UserInterface OSD Output

Define on which monitor the on-screen information and indicators (OSD) should be displayed.
Requires user role: ADMIN, INTEGRATOR
Default value: Auto
USAGE:
xConfiguration UserInterface OSD Output:
where
: Auto/1/2/3
Output
Auto: The system detects when a monitor is connected to a video output, and sends
the on-screen information and indicators to the first monitor you connect. If you have
a multi-monitor setup, and all monitors are connected before switching on the system,
the on-screen information and indicators are sent to the video output with the lowest
number, starting with Output Connector 1 (HDMI 1).
Range 1-3: The system sends the on-screen information and indicators to the speci-
fied output. Choose n to send the on-screen information and indicators to the system's
Output Connector n.
85
API Reference Guide
xStatus Appendices
Output
Copyright © 2017 Cisco Systems, Inc. All rights reserved.