Diagnostics Commands; Xcommand Diagnostics Run; Dial Commands; Xcommand Dial - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

Diagnostics commands

xCommand Diagnostics Run

This command runs self-diagnostics commands on the system.
Requires user role: ADMIN
USAGE:
xCommand Diagnostics Run [ResultSet: ResultSet]
where
: Alerts/All/None
ResultSet
You can filter the diagnostics results to alerts, all or none. If not set, the result will show
all results.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand xCommand

Dial commands

xCommand Dial

Dial out from the system. Returns information about the CallId and ConferenceId, which are
required for some of the other commands.
Requires user role: ADMIN, USER
USAGE:
xCommand Dial Number: "Number" [Protocol: Protocol] [CallRate: CallRate]
[CallType: CallType] [BookingId: "BookingId"] [Appearance: Appearance]
[DisplayName: "DisplayName"]
where
: String (0, 255)
Number
Enter the number or address.
: H320/H323/Sip/Spark
Protocol
Select the call protocol.
: Integer (64..6000)
CallRate
Set the call rate.
: Audio/Video
CallType
Select the call type.
: String (0, 255)
BookingId
Any identifier that an external booking system (e.g. TMS, CTS-MAN) can use for its
own references to match placed calls with the booking systems internal identifier for a
meeting. This can be any string, e.g. a GUID. The booking Id is supplied in call logs, call
events etc for the call.
: Integer (1..999999999)
Appearance
Internal usage only.
: String (0, 255)
DisplayName
The display name of the remote participant.
128
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.