Cisco TelePresence SX80 Reference Manual page 214

Cisco TelePresence SX80

Introduction
xStatus Video Selfview Mode
Shows whether selfview mode is set on or not.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
On/Off
Example:
xStatus Video Selfview Mode
*s Video Selfview Mode: Off
** end
xStatus Video Selfview OnMonitorRole
Identifies which monitor(s) contains the selfview, if present.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
First/Second/Third/Fourth
Example:
xStatus Video Selfview OnMonitorRole
*s Video Selfview OnMonitorRole: First
** end
xStatus Video Selfview PIPPosition
Shows the position of the selfview image on the screen.
Requires user role: ADMIN, INTEGRATOR, USER
Value space of the result returned:
UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/LowerLeft/LowerRight
Example:
xStatus Video Selfview PIPPosition
*s Video Selfview PIPPosition: LowerRight
** end
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand
214
API Reference Guide
xStatus xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.