Cisco TelePresence SX80
Introduction
xCommand CallHistory DeleteEntry
Deletes all information on the specified call.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory DeleteEntry CallHistoryId:
[AcknowledgeConsecutiveDuplicates: AcknowledgeConsecutiveDuplicates]
where
: Integer (1..2147483647)
CallHistoryId
CallHistoryId for the call in question. Run xCommand CallHistory Get to get the id
number.
AcknowledgeConsecutiveDuplicates
You can include or exclude all surrounding calls with duplicate information.
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API
xConfiguration
CallHistoryId
: False/True
xCommand
xCommand
xCommand CallHistory Get
Retrieve all information on previous calls made on the video system.
Requires user role: ADMIN, USER
USAGE:
xCommand CallHistory Get [Filter: Filter] [Offset: Offset] [Limit: Limit]
[DetailLevel: DetailLevel] [SearchString: "SearchString"] [CallHistoryId:
CallHistoryId]
where
: All/Missed/AnsweredElsewhere/Forwarded/Placed/NoAnswer/Received/Rejected/
Filter
UnacknowledgedMissed
You can filter which calls to retrieve.
: Integer (0..65534)
Offset
Sets the call from which to start.
: Integer (0..65534)
Limit
Defines the amount of calls in the output.
: Basic/Full
DetailLevel
Sets the level of detail for the information on these calls.
: String ( 0, 255)
SearchString
Allows you to set the command to apply to a specified display name or call back
number.
: Integer (0..65534)
CallHistoryId
CallHistoryId for the call in question.
118
API Reference Guide
xStatus
Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.