Time Commands; Xcommand Time Datetime Get; Xcommand Time Datetime Set; Userinterface Commands - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

Time commands

xCommand Time DateTime Get

Read the time and date from the system.
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Get

xCommand Time DateTime Set

Set the date and time for the system, if not available from NTP (Network Time Protocol).
Requires user role: ADMIN, USER
USAGE:
xCommand Time DateTime Set [Year: Year] [Month: Month] [Day: Day] [Hour: Hour]
[Minute: Minute] [Second: Second]
where
: Integer (2015..2037)
Year
: Integer (1..12)
Month
: Integer (1..31)
Day
: Integer (0..23)
Hour
: Integer (0..59)
Minute
: Integer (0..59)
Second
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration xCommand xCommand

UserInterface commands

xCommand UserInterface Extensions Clear

Delete all user interface extensions (widgets) from the video system.
Requires user role: ADMIN
USAGE:
xCommand UserInterface Extensions Clear

xCommand UserInterface Extensions List

List all user interface extensions (widgets) that exist on the video system.
Requires user role: INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Extensions List

xCommand UserInterface Extensions Set

Set the configuration scheme you have chosen in the user interface extensions (widgets) for
your room system. Updates the UserInterface Extensions status tree.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Extensions Set ConfigId: "ConfigId"
where
: String (0, 40)
ConfigId
The unique identifier for the configuration.
145
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.