Provisioning Commands; Xcommand Provisioning Completeupgrade; Xcommand Provisioning Postponeupgrade; Xcommand Provisioning Startupgrade - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

Provisioning commands

xCommand Provisioning CompleteUpgrade

Starts installing the software upgrade if you wish to install it before it is set to do so.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning CompleteUpgrade

xCommand Provisioning PostponeUpgrade

Postpones the installing of the software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning PostponeUpgrade SecondsToPostpone:
where
: Integer (0..65534)
SecondsToPostpone
Set how long to postpone the upgrade. The value is in seconds.

xCommand Provisioning StartUpgrade

The codec software can be upgraded from the provisioning server. When starting the upgrade
the software is automatically downloaded and installed. The codec reboots to complete the
software upgrade.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning StartUpgrade
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
SecondsToPostpone
xCommand xCommand

xCommand Provisioning ExtensionMobility Login

Login command for the Extension Mobility service. You log in to the Extension Mobility service
with a user name (UserId) and pin code (Pin). The user name and pin code are set up in CUCM.
CUCM also supports multiple profiles for a user.
If you, for a user that has multiple profiles, submit a login command with only user name and
pin code, CUCM will send a list of available profiles back to the video system. Then the video
system will create corresponding ExtensionMobilityProfileSelection Profile events, so that a
new login command, which contains the Profile parameter in addition to the user name and pin
code, can be submitted.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning ExtensionMobility Login UserId: "UserId" Pin: "Pin"
[Profile: "Profile"]
where
: String (1, 255)
UserId
A valid user name, as set up in CUCM.
: String (1, 255)
Pin
A valid pin code for the user, as set up in CUCM.
: String (1, 255)
Profile
A valid profile for the user, as set up in CUCM. This parameter applies only if the user
has multiple profiles.

xCommand Provisioning ExtensionMobility Logout

This command will log you out of your Extension Mobility profile.
Requires user role: ADMIN, USER
USAGE:
xCommand Provisioning ExtensionMobility Logout
138
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.