Xcommand Audio Localoutput Updateinputgain; Xcommand Audio Microphones Mute; Xcommand Audio Microphones Togglemute; Xcommand Audio Microphones Unmute - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80

Introduction

xCommand Audio LocalOutput UpdateInputGain

Update the gain of a local or remote input that is connected to a local output. Note that the
remote input signal (from far-end) is automatically added to all local outputs when a call is
made, and automatically disconnected when the call is ended.
Run xStatus Audio Output LocalOutput to get an overview of all local outputs, xStatus Audio
Input LocalInput to get an overview of all local inputs, and xStatus Audio Input RemoteInput to
see the remote input details.
This command is mainly intended for internal use by the CE Console. If you don't use CE
Console, you need to manually add the command in a startup script in order to make the defini-
tion persistent over a reboot.
Requires user role: ADMIN
USAGE:
xCommand Audio LocalOutput UpdateInputGain OutputId:
[InputGain: InputGain]
where
: Integer (0..65534)
OutputId
The unique identifier of the local output. It was generated when the local output was
created with the xCommand Audio LocalOutput Add command.
: Integer (0..65534)
InputId
The unique identifier of the local or remote input. The local input's ID was generated
when the local input was created with the xCommand Audio LocalInput Add command.
The remote input's ID was generated automatically when the call was made.
: Integer (-54..15)
InputGain
Set the gain on the input signal. The gain can also be negative (attenuation). The value
-54 dB equals Off.

xCommand Audio Microphones Mute

Mute all microphones.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand Audio Microphones Mute
Cisco TelePresence SX80 API Reference Guide CE9.1, JUNE 2017.
D15317.07
About the API xConfiguration
OutputId InputId:
xCommand xCommand

xCommand Audio Microphones ToggleMute

Toggle the microphone between muted and unmuted.
Requires user role: INTEGRATOR, USER
USAGE:
xCommand Audio Microphones ToggleMute

xCommand Audio Microphones Unmute

Unmute all microphones.
Requires user role: INTEGRATOR, USER
USAGE:
InputId
xCommand Audio Microphones Unmute
108
API Reference Guide
xStatus Appendices
Copyright © 2017 Cisco Systems, Inc. All rights reserved.