Audio Status; Xstatus Audio; Xstatus Audio Microphones Mute; Xstatus Audio Volume - Cisco TelePresence SX80 Reference Manual

Cisco TelePresence SX80
Contents Introduction

Audio status

xStatus Audio

Shows the top level overview of the audio status. The identities of the LocalInput, RemoteInput,
LocalOutput and RemoteOutput are used when querying additional information.

xStatus Audio Microphones Mute

Shows the microphones mute mode.
Value space of the result returned:
<On/Off>
Example:
xStatus Audio Microphones Mute
*s Audio Microphones Mute: Off
** end

xStatus Audio Volume

Shows the volume level (dB) of the loudspeaker output.
Value space of the result returned:
<0..100>
Example:
xStatus Audio Volume
*s Audio Volume: 70
** end

xStatus Audio VolumeMute

Shows whether the endpoint volume is set to mute.
Value space of the result returned:
<Off/On>
Example:
xStatus Audio VolumeMute
*s Audio VolumeMute: Off
** end
Codec SX80 API Reference Guide TC7.3, OCTOBER 2015.
D15107.05
About the API xConfiguration

xStatus Audio Input LocalInput [n] Name

xStatus Audio Input LocalInput [n] MixerMode

xStatus Audio Input LocalInput [n] Mute

151
xCommand
Shows the name of the local input. A local input is a mix of input connectors. You can run the
command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
<String>
Example:
xStatus Audio Input LocalInput 1 Name
*s Audio Input LocalInput 1 Name: "Microphone"
** end
Shows how the local input connectors have been mixed together. You can run the command
xStatus Audio Input LocalInput to find the identity [n] of the input.
Auto: The microphone with the strongest speaker is active and the others are strongly attenuated.
Fixed: The input connector signals are mixed together with equal gains.
GainShared: The microphones are given a normalized gain factor relative to the strongest speaker
before being mixed together.
Value space of the result returned:
<"Auto"/"Fixed"/"GainShared">
Example:
xStatus Audio Input LocalInput 1 MixerMode
*s Audio Input LocalInput 1 MixerMode: "Auto"
** end
Shows the mute mode for the local inputs. A local input is a mix of input connectors.
You can run the command xStatus Audio Input LocalInput to find the identity [n] of the input.
Value space of the result returned:
<"On"/"Off">
Example:
xStatus Audio Input LocalInput 1 Mute
*s Audio Input LocalInput 1 Mute: "Off"
** end
API Reference Guide
xStatus xStatus Appendices
Copyright © 2015 Cisco Systems, Inc. All rights reserved.