Xcommand Audio Volume Mute; Xcommand Audio Volume Set; Xcommand Audio Volume Settodefault; Xcommand Audio Volume Togglemute - Cisco TelePresence SX10 Reference Manual

Hide thumbs Also See for TelePresence SX10:
Table of Contents

Advertisement

Cisco TelePresence SX10
Introduction

xCommand Audio Volume Mute

Mute the volume on the endpoint.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Mute

xCommand Audio Volume Set

Set the volume on the endpoint to a specified level.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Set Level:
where
: Integer (0..100)
Level
Select the gain level. 70 equals 0 dB gain, and 100 equals 15 dB gain.

xCommand Audio Volume SetToDefault

Set the volume to the default level that is defined in the xConfiguration Audio DefaultVolume
setting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume SetToDefault

xCommand Audio Volume ToggleMute

Toggle the loudspeaker between muted and unmuted.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume ToggleMute
Cisco TelePresence SX10 API Reference Guide CE9.1, JUNE 2017.
D15333.07
About the API
xConfiguration
Level
xCommand
xCommand

xCommand Audio Volume Unmute

Set the volume on the endpoint back on after muting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Unmute

xCommand Audio VuMeter Start

Start a VU meter to show the audio signal level on the specified connector. You have to specify
both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the
connector. The VU meter measures the input level for frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Start ConnectorID:
ConnectorType
where
: Integer (1..2) for Microphone; Integer (1..1) for HDMI
ConnectorID
Select a connector number. Together with the ConnectorType it uniquely identifies the
connector. Microphone [1] is the built-in microphone, and Microphone [2] is a micro-
phone connected to the mini-jack input connector.
: HDMI/Microphone
ConnectorType
Select the connector type.
89
API Reference Guide
xStatus
Appendices
ConnectorID
ConnectorType:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents