Xcommand Audio Volume Togglemute; Xcommand Audio Volume Unmute; Xcommand Audio Vumeter Start; Xcommand Audio Vumeter Stop - Cisco TelePresence DX70 Reference Manual

Cisco TelePresence DX70 and DX80

Introduction

xCommand Audio Volume ToggleMute

Toggle the loudspeaker between muted and unmuted.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume ToggleMute

xCommand Audio Volume Unmute

Set the volume on the endpoint back on after muting.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio Volume Unmute

xCommand Audio VuMeter Start

Start a VU meter to show the audio signal level on the specified connector. You have to specify
both the connector's type and number (ConnectorType, ConnectorId) to uniquely identify the
connector. The VU meter measures the input level for frequencies below 20 kHz.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Start ConnectorID:
ConnectorType [IncludePairingQuality: IncludePairingQuality]
where
ConnectorID
: Integer(1..1)
Select a connector number. Together with the ConnectorType it uniquely identifies
the connector. Microphone [1] refers to the selected audio device (built-in loudspeak-
ers, headsets, or handset). Refer to the xStatus Audio SelectedDevice and xCommand
Audio Select commends for more information about the selected device.
ConnectorType
: HDMI/Microphone
Select the connector type.
IncludePairingQuality
: Literal (Off / On )
The default is set to Off
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
About the API xConfiguration
ConnectorID ConnectorType:
xCommand xCommand

xCommand Audio VuMeter Stop

Stop the VU meter on the specified connector. You have to specify both the connector's type
and number (ConnectorType, ConnectorId) to uniquely identify the connector.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter Stop ConnectorID:
ConnectorType
where
ConnectorID
: Integer(1..1)
Select a connector number. Together with the ConnectorType it uniquely identifies
the connector. Microphone [1] refers to the selected audio device (built-in loudspeak-
ers, headsets, or handset). Refer to the xStatus Audio SelectedDevice and xCommand
Audio Select commends for more information about the selected device.
ConnectorType
: HDMI/Microphone
Select the connector type.

xCommand Audio VuMeter StopAll

Stop all VU meters.
Requires user role: ADMIN, USER
USAGE:
xCommand Audio VuMeter StopAll
98
API Reference Guide
xStatus Appendices
ConnectorID ConnectorType:
Copyright © 2017 Cisco Systems, Inc. All rights reserved.