GE D90 Plus Instruction Manual page 537

CHAPTER 13: SECURITY
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
• The EnerVista security management system must be enabled.
1. Select the Security > User Management menu item to open the user management
configuration window.
2. Locate the username in the User field.
3. Modify the user access rights by checking or clearing one or more of the fields shown.
Field Description
Delete Entry Checking this box will delete the user when exiting the user management
configuration window.
Actual Values Checking this box allows the user to read actual values.
Settings Checking this box allows the user to read setting values.
Commands Checking this box allows the user to execute commands.
Event Recorder Checking this box allows the user to use the digital fault recorder.
Protection FlexLogic Checking this box allows the user to read protection FlexLogic™ values.
Automation Logic Checking this box allows the user to read automation logic values.
Update Info Checking this box allows the user to write to any function to which they have
read privileges. When any of the Settings, Event Recorder, Protection
FlexLogic, and Automation Logic boxes are checked by themselves, the user
is granted read access. When any of these are checked in conjunction with
the Update Info box, they are granted read and write access. The user will
not be granted write access to functions that are not checked, even if the
Update Info field is checked.
Admin When this box is checked, the user will become an EnerVista UR
Setup administrator, therefore receiving all of the administrative rights.
Exercise caution when granting administrator rights.
4. Click OK to save the changes to user to the security management system.
ENERVISTA SECURITY MANAGEMENT SYSTEM
Plus
529