GE D90 Plus Instruction Manual page 21

CHAPTER 1: GETTING STARTED
Using the Quick Connect feature via the USB port
Connecting to the D90
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
The site device has now been configured for Ethernet communications. Proceed to the
Plus
Connecting to the D90
Before starting, verify that the standard USB cable is properly connected from the laptop
computer to the front panel USB port.
1. Verify that the latest version of the EnerVista UR
(available from the GE EnerVista CD or online from
http://gegridsolutions.com/multilin). See the Software Installation section for
installation details.
Plus
2. Select the "UR " device from the EnerVista Launchpad to start EnerVista UR
Setup.
3. Click the Quick Connect button to open the Quick Connect dialog box.
4. Select the Serial interface and the correct COM Port, then click Connect.
Plus
5. The EnerVista UR Setup software will create a site named "Quick Connect" with a
corresponding device also named "Quick Connect" and display them on the upper-left
corner of the screen. Expand the sections to view data directly from the
Plus
D90 device.
Each time the EnerVista UR
to establish direct communications to the D90
Plus
EnerVista UR Setup software matches the D90
Plus
This example will show how to connect to the D90
1. Open the Breakers window through the site list tree.
section to begin communications.
Plus
Setup software is initialized, click the Quick Connect button
Plus
. This ensures that configuration of the
Plus
Plus
ENERVISTA SOFTWARE
Plus
Setup software is installed
model number.
and configure the breaker settings.
Plus
13