Emergency Stop Button; Switching X-Ray Unit On - Planmeca ProMax 3D S User Manual

5.6

Emergency stop button

6

SWITCHING X-RAY UNIT ON

Stationary column top
User's Manual (3D)
On / off switch
NOTE To prolong the lifetime of the X-ray unit, always switch
SWITCHING X-RAY UNIT ON
The emergency stop button is located on the top of the
stationary column. Press the button to stop the X-ray unit
operating in an emergency. When the emergency stop
button is pressed down, all movements of the X-ray unit
are blocked and the unit will not generate radiation. The
up / down movement will stop within a distance of 10 mm
(0.4 in.).
A help message will appear on the control panel display.
Guide the patient away from the X-ray unit. Then release
the emergency stop button. The X-ray unit will
automatically restart.
The on / off switch is located on the underside of the
stationary column top. When you switch the X-ray unit on
the main display will be shown on the control panel and
the X-ray unit will carry out a self-test which will last a few
seconds.
The X-ray unit is then ready for use.
the unit off when it is not in active use.
Planmeca ProMax 3D s / 3D 13