Planmeca Promax 3D - Planmeca ProMax 3D S User Manual

7.2

Planmeca ProMax 3D

7.2.1 3D Standard and 3D Horizontal Pair programs
50 mm
80 mm
50 mm
80 mm
Adult sizes:
Ø80 x H80 mm
Ø80 x H50 mm Ø50 x H50 mm
User's Manual (3D)
Ø50 x H80 mm
Volume sizes Volume diameter FULL
Volume height Child: 68 x 68 mm (ØxH)
FULL Adult: 80 x 80 mm (ØxH)
Volume height Child: 68 x 42 mm (ØxH)
UPPER / LOWER Adult: 80 x 50 mm (ØxH)
The 3D Standard program produces images which
consist of one cylindrical volume. The 3D Horizontal Pair
program produces images which consist of two cylindrical
volumes (one on each side). The target area is selected
using preprogrammed target sites.
The volume diameter (child / adult) can be set to Half (42 /
50 mm) or Full (68 / 80 mm). The volume height (child /
adult) can be Lower (42 / 50 mm), Upper (42 / 50 mm) or
Full (68 / 80 mm).
The available volume size combinations are:
Planmeca ProMax 3D s / 3D 17
PROGRAMS
Volume diameter HALF
Child: 42 x 68 mm (ØxH)
Adult: 50 x 80 mm (ØxH)
Child: 42 x 42 mm (ØxH)
Adult: 50 x 50 mm (ØxH)