Planmeca ProMax 3D S User Manual page 20

PROGRAMS
3D Horizontal Pair
•
7.1.2 3D Large View programs
Max. adult sizes:
75mm
Large View 2 horizontal
100mm
50mm
OR
16 Planmeca ProMax 3D s / 3D
Large View 3 horizontal
50mm
Large View
2 vertical
• Left and right molars
• Left and right TMJs
• Left and right ears
The 3D Horizontal Pair program takes two symmetrical
images: one from the left and one from the right side of
the patient.
The 3D Large View programs produce images which each
consist of two (or three) cylindrical volumes. The target
area is selected using preprogrammed target sites.
The 3D Large View programs are:
• Large View 2 horizontal
Two cylindrical volumes are positioned next to each
other with an overlap in the middle, i.e. the volumes
are stitched together in the horizontal direction. The
maximum combined volume size is 75 x 80 mm for
adults.
• Large View 3 horizontal
Three cylindrical volumes are positioned next to each
other with two overlaps in the middle, i.e. the volumes
are stitched together in the horizontal direction. The
maximum combined volume size is 100 x 80 mm for
adults.
• Large View 2 vertical
Two cylindrical volumes are positioned on top of each
other with an overlap in the middle, i.e. the volumes
are stitched together in the vertical direction. The
maximum combined volume sizes are 50 x 110 mm
and 50 x 130 mm for adults (depending on the
selected vertical movement).
User's Manual (3D)