User Settings - Planmeca ProOne User Manual

14.1 User settings

14.1.1 Setting time and date (U1100)
User's Manual
User settings
On the display you can set time & date,
select the language for the control panel displays and
adjust or view operational and network settings. The
component information needed for service and
maintenance purposes is also available here.
The available options are described in detail on the
following pages.
User settings
Exit the display by touching the green check
mark button in the bottom right corner of the display.
To set the X-ray unit so that the current time and/or date
will be shown at the bottom of the control panel display,
Set time and date (U1100)
first select the
User settings
display. The
display will appear.
Display time and/or date
14 SETTINGS
option on the
Set time and date (U1100)
Select time format
Set time
Select date format
Set date
Planmeca ProOne 73