Aastra OpenCom 510 User Manual page 51

Interfaces and Connectible Terminals
Voice Mail
If you are using an external voice mail system, it must be capable of handling the
number of digits used for internal telephone numbers, e.g. five digits if you have
configured five-digit internal numbers. We recommend the following Speech
Design products: Memo 200/300/400 or Memo 200-A/300-A/400-A.
The external voice mail system can be connected to internal a/b ports as well as to
internal S
ports. For both port types the voice mail system can activate the notifi-
0
cation for system terminals with the code procedures
Intercom System (for a/b)
The intercom systems "DoorLine T01/02" and "DoorLine T03/04" of the german
Telekom's division T-Com can be connected via the "DoorLine M06" to any a/b
port. The "DoorLine" module provides the actor for the door opener contact.
Observe the following when connecting:
■
The intercom system and the "DoorLine" module should be set to their factory
settings.
■
In the PBX Configuration: Ports: a/b: Change menu in the Configurator, select
Doorstation 2-wire under Type. Activate the Actuator option, if you want to
use the actor port of the OpenCom 510 instead of the "DoorLine" relay. The
"DoorLine" actor can be operated only when the speech channel is open at the
same time. The internal actor can be operated at any time.
■
The "DoorLine" intercom system has a number of bell keys to which you can
assign different call numbers in the PBX Configuration: Ports: Doorbell menu
in the Configurator.
■
You can call the "DoorLine" intercom system by entering the code procedure
*102
.
■
The "DoorLine" intercom system can be connected to any a/b port. However,
you can use only one "DoorLine" with the OpenCom 510.
For details on installing and configuring the "DoorLine" intercom system, refer to
the product user guide.
put impedance can cause irreparable damage to the
OpenCom 510!
*68 #68
resp.
a/b Ports
.
49