Setting Up Video Telephony - Aastra OpenCom 510 User Manual

Configuring the PC Software
Installing the browser
1. Call up the start mask from the product CD (see Configuring the PC Software on
page 170).
2. From the start mask, select Software: Install Browser for OpenCTI or
Software: Install Browser for OpenHotel. Follow the program instructions.
3. Follow the program instructions.
After installing the browser, there is a new menu entry in the Windows start menu
under Programs: OpenCTI Browser respectively Programs: Hotel Starter.
Further information can be found in the online help of the browser program. To
view this, click the top left corner in the OpenCTI-browser's program window on
the system menu symbol or on the symbol in the information area of the task bar.
Select the Readme command. You will find the OpenHotel's readme in the instal-
lation directory of this browser program.
17.6

Setting up Video Telephony

You can use the OpenCTI to switch on the video function during an internal call.
To be able do this, the Microsoft NetMeeting 3.0 program must be installed and
set up on all participating workplace computers.
Set up Microsoft NetMeeting 3.0
1. Connect a standard web cam to the workplace computer and install the driver.
2. In the Windows Start menu select Run and enter: "conf.exe". Confirm your
selection with OK.
3. Follow the instructions of the Install Wizard. Registration in an Internet
directory is not necessary and is not recommended. Select the installed web
cam and exit the Install Wizard.
Note: Both browser programmes can be used simultane-
ously.
Note: NetMeeting is already pre-installed on the Microsoft
Windows 2000 and XP operating systems.
Setting up Video Telephony
177