Aastra OpenCom 510 User Manual page 17

Factory Settings
The following terminal functions are preset for the "Administrators" group:
■
External line access: International numbers can be called from all configured
telephones. External lines must be seized by entering a prefixed code.
■
Least cost routing (LCR) is not active. As soon as LCR is configured, users can
make calls using selected call-by-call providers.
■
VIP call is activated.
■
Announcements to system terminals are possible.
■
Baby calls can be configured.
■
If a call key is configured for a user on more than one terminal, he can program
this key for more than one outgoing call, i.e. he can use his various terminals to
make parallel calls from this telephone number.
■
"Pickup" and "Pickup selective" of calls from other telephones are activated.
Pickup protection is deactivated.
■
"Call removal" is deactivated.
■
"Callback on busy" can be activated.
■
If a user has configured more than one terminal under the same number, they
can suppress the signalling of calls at the parallel terminals.
■
Function "Reaction: Connection will be disconnected" is deactivated as callers
trying to reach a terminal that cannot be reached or is busy will hear a busy
signal.
■
Function "Call queue" is deactivated.
Note: When the OpenCom 510 is first put into operation, all
connected terminals are in the "Administrators" group until a
user logs on to the web console. All terminals are then auto-
matically allocated to the "Guests" group. For further infor-
mation on configuring user groups and users, refer to the on-
line help chapter "User Manager".
Authorisations
15