Loading Sw Updates; Resetting The System Data - Aastra OpenCom 510 User Manual

Configuration
The mail account for this service (Account for LOG filter) is configured in the Con-
figurator, NET Configuration: E-Mail Access.

8.2.11 Loading SW Updates

New versions of the system and terminal software can be loaded to the system.
New software versions of the OpenCom 510 are loaded from the configuration PC,
which accesses the Configurator (see the SYS Configuration: Firmware menu).
For information on connecting a configuration PC, see Brief Guide to Initial Configu-
ration on page 88.
The terminal software is part of the OpenCom 510 software and is automatically
loaded into the terminals via the OpenCom 510 if the software version in the ter-
minal is different from the terminal software stored in the OpenCom 510.
For further information, refer to the online help documentation under the item
SYS Configuration: Firmware.

8.2.12 Resetting the System Data

You can restore the factory settings of the OpenCom 510 in the Configurator.
Please note:
Proceed as follows:
1. In the Configurator, call up the SYS Configuration: Restart menu.
2. Click on Restart with Defaults.
3. Confirm this by pressing "OK" when the query dialogue box opens.
If this is done, all individual settings and the user data are
then lost. For this reason, you should back up your configura-
tion regularly, the best time to do so being after every
change. For details, refer to the chapter entitled Saving and
Loading the Configuration starting on page 96 and to the
Web console online help.
Configuring the OpenCom 510
97