Aastra OpenCom 510 User Manual page 197

Frequently Asked Questions LAN
How can I determine the IP address of the OpenCom 510?
*182
To find out what the IP address is, enter the code number on one of
the connected system telephones.
*183
The code-number procedure also displays the network mask.
The network connection is functioning, but nothing is displayed in the brow-
ser.
Enter the complete IP address of the OpenCom 510 along with the protocol iden-
tifier, for example http://192.168.99.254/.
Check whether the browser has been configured for connection through a proxy
server. If so, deactivate the "Connect through proxy server" setting.
You have just configured the OpenCom 510 via the network. Why is it not
possible now to establish a remote data transfer network connection?
The network card and the communication (remote data transfer) adapter cannot
be run with the same routing setting. Deactivate the network card before con-
necting via the dial-up network.
Our network has grown over time, with several segments connected by one
central router. How can PCs from all segments connect to the OpenCom 510?
If several routers are configured for your network in different segments, you can
enter extra static routes in the NET Configuration: LAN: Routes menu.
In our network the OpenCom 510 dynamically issues the IP addresses by
DHCP. Can I firmly assign the IP address for our internal server PCs (mail,
Web)?
You need a static address assignment for these PCs. Make the appropriate host
assignment entries in the Configurator (NET Configuration: LAN: Hosts menu).
Create a static DHCP entry for each host assignment in the NET Configuration:
LAN: DHCP Server menu. Activate "Dynamic and static address" for the DHCP
server.
195