Configuring The Opencom 510; Preparing The Configuration; Starting The Web Console - Aastra OpenCom 510 User Manual

Configuration
8.2

Configuring the OpenCom 510

8.2.1 Preparing the Configuration

Before starting with the configuration, make sure you have the following docu-
ments at hand:
■
An overview of the ports
■
A list of the terminals to be connected
■
A list of the IPEIs, if you wish to log on DECT terminals in the secure procedure
■
A list of the users to be set up (staff entitled to use the services of the
OpenCom 510) with their names, departments, and the internal call numbers
you want to allocate to them
■
For Internet access: the Internet service provider access data.
Data not available for initial configuration can be updated or corrected at a later
date.

8.2.2 Starting the Web Console

1. Start your Web browser. Enter the OpenCom 510 IP address in the "Address"
box: http://192.168.99.254/.
If the configuration PC gets its IP address automatically from the OpenCom 510
or if the OpenCom 510 is entered as the domain name server, you can also start
the Web console by entering the DNS name. The DNS name in the factory
setting is host.domain. You can change this in the Configurator (NET Confi-
guration: LAN menu).
2. The OpenCom 510 Web console is started. First set the country in which you
are operating the OpenCom 510, and in which language the Web console is to
be displayed.
90
Note: Use the Configuration Guide starting on page 181. This
will assist you in making the settings in the correct sequence.
Configuring the OpenCom 510