Configuring The Pc Software; Pc Offline Configuration - Aastra OpenCom 510 User Manual

Configuring the PC Software

17. Configuring the PC Software
Further possibilities of use can be implemented on a workstation PC with the
Windows operating system by installing drivers and programmes. You can find the
installation programmes required for this on the product CD that comes with the
OpenCom 510.
Proceed as follows to install extra software:
1. Log on under Windows NT or Windows 2000/XP as the administrator.
2. Insert the product CD.
If your PC is suitably configured, the CD will start automatically. Otherwise
select Run from the Start menu. Click on the Browse button to look for the
program "cd_start.exe" on the CD. Confirm this with Open and OK.
3. Select the required option from the start interface. Follow the program instruc-
tions.
Further instructions for various options that are available are given below.
17.1

PC Offline Configuration

The offline configurator is a reduced system software that is executable under the
operating systems Microsoft Windows 2000 or Microsoft Windows XP. With the
offline configurator it is possible to create system configurations for various TC-
system types – without a connection to the live system. You configure a virtual
system and later, aided by the data backup, transfer the configuration to the
running system.
Installing the offline configurator
1. Display the product CD contents in Windows Explorer. Search the "\OFC\"
installation directory for the offline configurator.
2. Start the StartCenter installation program by double-clicking on "Setup.exe".
Following the installation assistant's instructions. Select the appropriate instal-
lation directory or apply the default.
170
PC Offline Configuration