Saving And Loading The Configuration; Receiving System Messages As E-Mail - Aastra OpenCom 510 User Manual

Configuration
Example
H*1830000*192*168
Enter:
*99*254#
If required, initiate a system restart with this procedure:
H * 1 8 5 Z
Use the PIN you entered in the dialogue box for initial access. The factory setting is
"0000".

8.2.9 Saving and Loading the Configuration

Configurations are saved in a file archive and can be loaded to the OpenCom 510
either locally from a connected configuration PC, or by remote configuration.
The following configuration and customer data can be saved and loaded again:
■
Telephony and network parameters
■
User data
■
Telephone book entries
■
LCR tables
For further information, refer to the online help documentation under the topic
SYS Configuration: Data backup.

8.2.10 Receiving System Messages as E-Mail

Important events and errors are kept by the OpenCom 510 in an internal log book:
the error store. To inform or alert the system administrators, entries in the log book
(system messages) can be sent via e-mail.
In order not to notified of every error, the administrator can define corresponding
log filters (in the Configurator, the LOG Configuration: LOG Filter menu). These
filters define which errors (category, severity, number per time interval) should be
notified. The e-mails always include an internal event or error number, as well as an
explanation of the message. Further, extra parameters (such as the port number
when a trunk line drops out) are also provided.
96
#
(system PIN)
Configuring the OpenCom 510