7 Using the product
7.6.4
Auto Tfac (Temperature compensation
factor)
A surface compensation factor has been set in the measuring instrument to
reduce the measuring errors in the main field of applications. This reduces
measuring errors when using surface temperature probes.
Surface temperature probe
An NTC temperature probe (accessory) must be connected for
measuring the pipe temperature and for automatic calculation of
superheating and subcooling.
✓
The
Settings
1
Select
Auto Tfac
[Menu/Enter]
Menu properties are displayed.
[▲] / [▼]
2
Press
press
[Menu/Enter]
[▲] / [▼]
Press
to open. You will obtain further information on temperature
compensation.
3
Press [ESC]: 1x main menu view, 2 x measurement menu view
56
menu is activated.
and press
to confirm.
to select
On/Off
to confirm.
to select the question mark icon and
and
[Menu/Enter]