Menu 20: Application Menu 3 - Control Techniques Digitax ST Advanced User's Manual

Parameter Keypad and
Parameter x.00
structure display
5.21

Menu 20: Application menu 3

Menu 20 contains parameters that do not affect the operation of the drive. These general purpose parameters are intended for use with fieldbus and
application Solutions Modules. The read write parameters in this menu cannot be saved in the drive.
20.01 to 20.20 Application menu 3 read-write integer
Bit SP
Coding
Range -32,768 to 32,767
Default 0
Update rate N/A
20.21 to 20.40 Application menu 3 read-write long integer
Bit SP
Coding
31 31
Range
-2 to 2 -1
Default 0
Update rate N/A
*Menu 20 parameters are saved in a difference from defaults type data block if they are not at their default value.
Digitax ST Advanced User Guide
Issue Number: 1
Parameter
description format
FI DE Txt VM DP ND
FI DE Txt VM DP ND
www.controltechniques.com
Advanced parameter Serial comms
descriptions protocol
RA NC NV PT US RW BU
1* 1
RA NC NV PT US RW BU
1* 1
Electronic
Performance
nameplate
PS
PS
Menu 20
201