Line Screen - NEC UNIVERGE DT930 User Manual

LINE SCREEN

This screen shows the line key information
registered in system.
On Touch Panel model, the line key status is
displayed with the line key lamp icon.
The system information display area on the line
screen displays the second to third lines of
information displayed on the call screen.
■The line screen is available for
DT930 (Touch Panel model),
DT920 (Self Labeling model) only.
■Double height character display is
not available on the system
information display area.
Count lines on the call screen
Display Example for DT930 (Touch Panel
model)
System information display area
Line key name
Line key icon
First line
Second line
Third line
Line key lamp icon
Display Example for DT920 (Self Labeling
model)
Programmable key
System information display area
Line key icon
The line key status can be distinguished by line
key lamp (on/off/flash) or line key lamp icon
display. The following table shows the line key
lamp/lamp icon indications by each terminal
status.
Line key Line key
lamp lamp icon
OFF Not displayed Idle state
Green
Steady
Red
Flashing
Green
Flashing
Green
Flashing
Red
Steady
Red
Flashing
Green
Flashing
For items with two line key lamp icons in
the above table, these icons will be
displayed alternately every 0.5 seconds
while the terminal status is continued.
12
OUTLINE
Programmable key
Line key name
Example of terminal
status
During an Outgoing
Set/Cancel DND
Incoming call is
arriving
Holding a call
Exclusive hold
The other terminal is
talking on line
The other terminal sets
exclusive hold
The other terminal is
holding a call
Recall from held call
after the
predetermined time