Management > Session Timeout; Management > File System - D-Link DXS-1100 series User Manual

4 Configuration
The fields that can be configured are described below:
Port: Enter the TCP port number used for Web-based management of the Switch. The "well-known" TCP
port for the Web-based protocol is 80.
Click Apply to accept the changes made.
Management > Session Timeout
This window is used to configure the session timeout.
The fields that can be configured are described below:
Web Session Timeout: Enter the time in seconds of the web session timeout. Tick Default to return to the
default setting. The value is from 60 to 36000 seconds. The default value is 180 seconds.
Click Apply to accept the changes made.
Management > File System
The File System is used to provide the user with flexible file operation on the Flash. All the firmware,
configuration information and system log information are stored in the Flash as files.
The fields that can be configured are described below:
Path: Enter the path string
Click Go to navigate to the path entered.
Click the C: hyperlink to navigate the C: drive.
After clicking the C: hyperlink, the following window will appear:
Figure 4.62 – Management > Web
Figure 4.63 – Management > Session Timeout
Figure 4.64 – Management > File System
4 9
4 9
D-Link 10 Gigabit Ethernet Switch User Manual