Internet; Wan Service; Dynamic Ip (Dhcp) - D-Link DWR-922 User Manual

Section 4 - Configuration
On this page you can configure your Internet connection. If you are not sure which settings to use, please contact your Internet Service Provider
(ISP).
My Internet
Select the Internet connection type specified by your ISP. The
Connection is:
corresponding settings will be displayed below. Please see the
following sections for details on how to configure these different
connection types.

Dynamic IP (DHCP)

Host Name: If the Internet host you are using requires you to enter a host
name, enter it here. In most cases, you may leave this blank.
Primary DNS (Optional) Fill in with IP address of primary DNS server.
Server:
Secondary DNS (Optional) Fill in with IP address of secondary DNS server.
Server:
MTU: You may need to change the Maximum Transmission Unit (MTU)
for optimal performance. The default value is 0.
MAC Address: The default MAC address is set to the WAN port's physical interface
MAC address on the router. It is not recommended that you
change the default MAC address unless required by your ISP. You
can use the Clone button to replace the WAN port's MAC address
with the MAC address of your PC.
D-Link DWR-922 User Manual

Internet

WAN Service

8