Access Control List (Acl) Commands - D-Link DGS-3224TGR Command Line Interface Reference Manual

The DGS-3224TGR implements Access Control Lists that enable the switch to deny network access to specific devices or
device groups based on IP settings or MAC address.
Command
create access_profile
delete access_profile
config access_profile
DGS-3224TGR Gigabit Ethernet Switch CLI Reference Manual
A
CCESS
Parameters
ethernet
vlan
source_mac <macmask>
destination_mac <macmask>
802.1p
ethernet_type
ip
vlan
source_ip_mask <netmask>
destination_ip_mask <netmask>
dscp
icmp {type | code }
igmp {type}
tcp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>
flag_mask [all| {urg | ack | psh | rst | syn | fin}
udp {src_port_mask <hex 0x0-0xffff> | dst_port_mask <hex 0x0-0xffff>}
protocol_id_mask <hex 0x0 - 0xFF>
user_define_mask <hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-
0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff>
packet_content_mask {offset_0-15 <hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex
0x0-0xffffffff><hex 0x0-0xffffffff> offset_16-31<hex 0x0-0xffffffff><hex 0x0-
0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff> offset_32-47 <hex 0x0-
0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff> offset_48-63
<hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-
0xffffffff>offset_64-79 <hex 0x0-0xffffffff><hex 0x0-0xffffffff><hex 0x0-
0xffffffff><hex 0x0-0xffffffff>}
port[<portlist>|all]
profile_id <value 1-8>
profile_id <value 1-8>
profile_id <value 1-8>
C
ONTROL
115
22
L (ACL)
IST
C
OMMANDS