Layer 3 Features; Browse Ip Address; Browse Routing Table - D-Link DGS-3324SRi User Manual
High-density layer 3 stackable intelligent gigabit ethernet switch
Hide thumbs
Also See for DGS-3324SRi:
- User manual (392 pages) ,
- Command line interface reference manual (357 pages) ,
- User manual (363 pages)
Table of Contents
Advertisement
D-Link DGS-3324SRi Intelligent Stackable Gigabit Ethernet Switch
Layer 3 Features
This folder in the Monitoring section will display information concerning settings configured in Layer 3 IP
Networking of the Configuration folder. These settings and parameters have been previously described in
Section 4 of this manual, under Layer 3 IP Networking.
Browse IP Address
The Browse IP Address window may be found in the Monitoring menu in the Layer 3 Feature folder. The
Browse IP Address window is a read only screen where the user may view IP addresses discovered by the
Switch. To search a specific IP address, enter it into the field labeled IP Address at the top of the screen and
click Find to begin your search.
Figure 6- 25. Browse IP Address window.
Browse Routing Table
The Browse Routing Table window may be found in the Monitoring menu in the Layer 3 Feature folder. This
screen shows the current IP routing table of the Switch. To find a specific IP route, enter an IP address into the
Destination Address field along with a proper subnet mask into the Mask field and click Find.
164
Advertisement
Table of Contents
