Stackable NWay Ethernet Switch User's Guide
To access the Custom Filtering Table, select Configure
Filtering
and
Forwarding
Table
from
the
System
Configuration menu. Then select Configure MAC Address
Filtering from the bottom of the Configure Filtering and
Forwarding table screen. The following screen appears:
Figure 6-21. Custom Filtering Table screen
To make a change to the Custom Filtering Table, choose Add
or Remove in the Action field. Then enter the MAC Address
and press APPLY.
Configure Permanent Multicast Filtering
Multicast filtering allows you to block or forward traffic over
each port for one multicast group.
To access the Static Multicast Filtering Table Configuration
screen, select Configure Filtering and Forwarding Table from
the System Configuration menu. Then select Configure
Permanent Multicast Filtering from the bottom of the
Using the Console Interface
89