Port Mapping - D-Link DSL-124 User Manual

Section 4 - Configuration
From the Port Mapping page you can bind the WAN interfaces and the LAN interfaces to
the same group.
Enable/Disable port mapping.

Port Mapping:

The procedure for manipulating a mapping group is as follows:
Step 1 Select a group from the table.
Step 2 Select interfaces from the WAN and LAN interface list and add them to
interface group list.
Step 3 Click Apply to save the changes.
D-Link DSL-124 Wireless N300 ADSL2+ Modem Router User Manual
PORT MAPPING SETUP
Port Mapping
89