Show Platform Ip Igmp Snooping - Cisco Catalyst 3750 Command Reference Manual

Appendix C Catalyst 3750 Switch Show Platform Commands

show platform ip igmp snooping

Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent
Internet Group Management Protocol (IGMP) snooping information.
Syntax Description all
control [di]
counters
flood [vlan vlan-id]
group ip-address
hardware
retry [count | local
[count]
remote [count]
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(11)AX
78-16181-01
show platform ip igmp snooping {all | control [di] | counters | flood [vlan vlan-id] | group
ip-address | hardware | retry [count | local [count] | remote [count]]} [ | {begin | exclude |
include} expression]
Display all IGMP snooping platform IP multicast information.
Display IGMP snooping control entries. The keyword has this meaning:
di—(Optional) Display IGMP snooping control destination index
•
entries.
Display IGMP snooping counters.
Display IGMP snooping flood information. The keyword has this meaning:
• vlan vlan-id—(Optional) Display flood information for the specified
VLAN. The range is 1 to 4094.
Display the IGMP snooping multicast group information, where ip-address is
the IP address of the group.
Display IGMP snooping information loaded into hardware.
Display IGMP snooping retry information. The keywords have these
meanings:
count—(Optional) Display only the retry count.
•
local—(Optional) Display local retry entries.
•
Display remote entries. The keyword has this meaning:
• count—(Optional) Display only the remote count.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
show platform ip igmp snooping
Catalyst 3750 Switch Command Reference
C-7