Debug Ip Dhcp Snooping - Cisco Catalyst 3550 Command Reference Manual

debug ip dhcp snooping

debug ip dhcp snooping
Use the debug ip dhcp snooping privileged EXEC command to enable debugging of DHCP snooping
events. Use the no form of this command to disable debugging.
Syntax Description
acl
event
packet
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug ip dhcp snooping command is the same as the no ip debug dhcp snooping command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst 3550 Multilayer Switch Command Reference
B-18
debug ip dhcp snooping {acl | event | packet}
no debug ip dhcp snooping {acl | event | packet}
Display all DHCP-snooping access control list (ACL) debug messages.
Display all DHCP snooping event debug messages.
Display all DHCP snooping packet debug messages.
Modification
This command was introduced.
Appendix B
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Catalyst 3550 Switch Debug Commands
OL-8566-02