Setting Mode User Level (X; Flow Temperature Set Point (!) - REMEHA Quinta 30 Technical Information

6.5 Setting mode user level (X[[)

Code Description
Flow temperature set
!
point
Pump run on time HTG
@
DHW temperature set
#
point
Boiler control setting
A
Base point internal
u
compensation slope
Table 06 Setting mode user level
Note: Changing code @ and code A should only be on design engineers advice

6.5.1 Flow temperature set point (!)

The required flow temperature is adjustable from 20 to 90°C (factory default 80°C).
Fig. 04 Typical setting change procedure
Setting range
20–90 ºC
= pump run on 10 seconds
00
01–15= pump run on in minutes
20–75 °C (only with sensor)
Control mode (modulating-on/off etc.)
n/a
20
Remeha Quinta 30
Preset
80
03
55
11
20