Checking The Configuration; Configuration Examples; Example For Configuring Mapping Of Single Vlan Tag - Huawei Quidway S7700 Configuration Manual - Ethernet

Quidway S7700 Smart Routing Switch
Configuration Guide - Ethernet
Step 6 Run:
port hybrid tagged vlan vlan-id
The interface is added to the VLAN specified by vlan-id.
Step 7 Run:
trust upstream ds-domain-name
The interface is bound to the DiffServ domain and the mapping in the DiffServ domain is applied
to the interface.
By default, the priority is not changed when the internal priority is mapped to the external
priority.
----End

4.6.4 Checking the Configuration

Procedure
l
l
----End

4.7 Configuration Examples

This section provides several examples of VLAN mapping configuration.

4.7.1 Example for Configuring Mapping of Single VLAN Tag

Networking Requirements
As shown in
VLAN 10 on the network.
Issue 01 (2011-07-15)
Run the display this command in the view of the incoming interface to check the
configuration of VLAN mapping based on the VLAN priority.
Run the display this command in the view of the outgoing interface to check the
configuration of VLAN mapping based on the VLAN priority.
Figure 4-1, users in VLAN 6 need to communicate with users in VLAN 5 through
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 VLAN Mapping Configuration
174